dmesg - Intel Core i7-5960X
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-39-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic.efi.signed root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000c9c0dfff] usable
BIOS-e820: [mem 0x00000000c9c0e000-0x00000000ca782fff] reserved
BIOS-e820: [mem 0x00000000ca783000-0x00000000ca7d0fff] ACPI data
BIOS-e820: [mem 0x00000000ca7d1000-0x00000000cc9defff] ACPI NVS
BIOS-e820: [mem 0x00000000cc9df000-0x00000000cd077fff] reserved
BIOS-e820: [mem 0x00000000cd078000-0x00000000cd078fff] usable
BIOS-e820: [mem 0x00000000cd079000-0x00000000cd0fefff] reserved
BIOS-e820: [mem 0x00000000cd0ff000-0x00000000cd317fff] usable
BIOS-e820: [mem 0x00000000cd318000-0x00000000cdff8fff] reserved
BIOS-e820: [mem 0x00000000cdff9000-0x00000000cdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
e820: update [mem 0xbcd3d018-0xbcd4c857] usable ==> usable
e820: update [mem 0xbcd2b018-0xbcd3c057] usable ==> usable
e820: update [mem 0xbcd19018-0xbcd2a057] usable ==> usable
e820: update [mem 0xbccfb018-0xbcd18857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x00000000bccfb017] usable
reserve setup_data: [mem 0x00000000bccfb018-0x00000000bcd18857] usable
reserve setup_data: [mem 0x00000000bcd18858-0x00000000bcd19017] usable
reserve setup_data: [mem 0x00000000bcd19018-0x00000000bcd2a057] usable
reserve setup_data: [mem 0x00000000bcd2a058-0x00000000bcd2b017] usable
reserve setup_data: [mem 0x00000000bcd2b018-0x00000000bcd3c057] usable
reserve setup_data: [mem 0x00000000bcd3c058-0x00000000bcd3d017] usable
reserve setup_data: [mem 0x00000000bcd3d018-0x00000000bcd4c857] usable
reserve setup_data: [mem 0x00000000bcd4c858-0x00000000c9c0dfff] usable
reserve setup_data: [mem 0x00000000c9c0e000-0x00000000ca782fff] reserved
reserve setup_data: [mem 0x00000000ca783000-0x00000000ca7d0fff] ACPI data
reserve setup_data: [mem 0x00000000ca7d1000-0x00000000cc9defff] ACPI NVS
reserve setup_data: [mem 0x00000000cc9df000-0x00000000cd077fff] reserved
reserve setup_data: [mem 0x00000000cd078000-0x00000000cd078fff] usable
reserve setup_data: [mem 0x00000000cd079000-0x00000000cd0fefff] reserved
reserve setup_data: [mem 0x00000000cd0ff000-0x00000000cd317fff] usable
reserve setup_data: [mem 0x00000000cd318000-0x00000000cdff8fff] reserved
reserve setup_data: [mem 0x00000000cdff9000-0x00000000cdffffff] usable
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000082fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xca792000 ACPI 2.0=0xca792000 SMBIOS=0xf0570 MPS=0xfd6a0
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000009000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000009000-0x000000000002f000) (0MB)
efi: mem03: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000040000) (0MB)
efi: mem04: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002403000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000002403000-0x0000000010000000) (219MB)
efi: mem08: type=3, attr=0xf, range=[0x0000000010000000-0x000000001000b000) (0MB)
efi: mem09: type=7, attr=0xf, range=[0x000000001000b000-0x000000003ecee000) (748MB)
efi: mem10: type=2, attr=0xf, range=[0x000000003ecee000-0x0000000040000000) (19MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000040000000-0x0000000088070000) (1152MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000088070000-0x00000000b73f7000) (755MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000b73f7000-0x00000000b7477000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000b7477000-0x00000000bccfb000) (88MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000bccfb000-0x00000000bce38000) (1MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000bce38000-0x00000000bce39000) (0MB)
efi: mem17: type=2, attr=0xf, range=[0x00000000bce39000-0x00000000bce3e000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000bce3e000-0x00000000bce44000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x00000000bce44000-0x00000000bce46000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000bce46000-0x00000000bce49000) (0MB)
efi: mem21: type=2, attr=0xf, range=[0x00000000bce49000-0x00000000bce4a000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000bce4a000-0x00000000bce4c000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x00000000bce4c000-0x00000000bce4d000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000bce4d000-0x00000000bce4e000) (0MB)
efi: mem25: type=2, attr=0xf, range=[0x00000000bce4e000-0x00000000bcf3a000) (0MB)
efi: mem26: type=1, attr=0xf, range=[0x00000000bcf3a000-0x00000000bd06e000) (1MB)
efi: mem27: type=2, attr=0xf, range=[0x00000000bd06e000-0x00000000bd06f000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000bd06f000-0x00000000c906f000) (192MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000c906f000-0x00000000c92c2000) (2MB)
efi: mem30: type=3, attr=0xf, range=[0x00000000c92c2000-0x00000000c9c0e000) (9MB)
efi: mem31: type=0, attr=0xf, range=[0x00000000c9c0e000-0x00000000ca783000) (11MB)
efi: mem32: type=9, attr=0xf, range=[0x00000000ca783000-0x00000000ca7d1000) (0MB)
efi: mem33: type=10, attr=0xf, range=[0x00000000ca7d1000-0x00000000cc9df000) (34MB)
efi: mem34: type=6, attr=0x800000000000000f, range=[0x00000000cc9df000-0x00000000cd01b000) (6MB)
efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000cd01b000-0x00000000cd078000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000cd078000-0x00000000cd079000) (0MB)
efi: mem37: type=6, attr=0x800000000000000f, range=[0x00000000cd079000-0x00000000cd0ff000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000cd0ff000-0x00000000cd318000) (2MB)
efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000cd318000-0x00000000cdff9000) (12MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000cdff9000-0x00000000ce000000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x0000000830000000) (29440MB)
efi: mem42: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: ASUS All Series/X99-DELUXE, BIOS 0904 09/22/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000E0000000 mask 3FFFE0000000 uncachable
1 base 0000D0000000 mask 3FFFF0000000 write-through
2 base 380000000000 mask 3FC000000000 uncachable
3 base 0000CF000000 mask 3FFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008c000] 8c000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
[mem 0x82fe00000-0x82fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
[mem 0x82c000000-0x82fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc9c0dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc9bfffff] page 2M
[mem 0xc9c00000-0xc9c0dfff] page 4k
init_memory_mapping: [mem 0xcd078000-0xcd078fff]
[mem 0xcd078000-0xcd078fff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xcd0ff000-0xcd317fff]
[mem 0xcd0ff000-0xcd317fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xcdff9000-0xcdffffff]
[mem 0xcdff9000-0xcdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x3ecee000-0x3fffafff]
ACPI: RSDP 00000000ca792000 000024 (v02 ALASKA)
ACPI: XSDT 00000000ca792098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ca7c2350 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ca7921d0 03017C (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 00000000cc9dbf80 000040
ACPI: APIC 00000000ca7c2460 000138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ca7c2598 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 00000000ca7c25e0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ca7c2680 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: ASF! 00000000ca7d0dd0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: UEFI 00000000ca7c2718 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 00000000ca7c2760 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 00000000ca7c2790 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 00000000ca7c27c8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 00000000ca7c2858 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 00000000ca7c28c0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 00000000ca7c28f0 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 00000000ca7c3748 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 00000000ca7c3788 00D609 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: BGRT 00000000ca7d0d98 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x82fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x82fffffff] -> [mem 0x00000000-0x82fffffff]
Initmem setup node 0 [mem 0x00000000-0x82fffffff]
NODE_DATA [mem 0x82fff7000-0x82fffbfff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f600000-ffff88082f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xc9c0dfff]
node 0: [mem 0xcd078000-0xcd078fff]
node 0: [mem 0xcd0ff000-0xcd317fff]
node 0: [mem 0xcdff9000-0xcdffffff]
node 0: [mem 0x100000000-0x82fffffff]
On node 0 totalpages: 8363470
DMA zone: 64 pages used for memmap
DMA zone: 52 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12857 pages used for memmap
DMA32 zone: 822831 pages, LIFO batch:31
Normal zone: 117760 pages used for memmap
Normal zone: 7536640 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbccfb000-0xbccfbfff]
PM: Registered nosave memory: [mem 0xbcd18000-0xbcd18fff]
PM: Registered nosave memory: [mem 0xbcd19000-0xbcd19fff]
PM: Registered nosave memory: [mem 0xbcd2a000-0xbcd2afff]
PM: Registered nosave memory: [mem 0xbcd2b000-0xbcd2bfff]
PM: Registered nosave memory: [mem 0xbcd3c000-0xbcd3cfff]
PM: Registered nosave memory: [mem 0xbcd3d000-0xbcd3dfff]
PM: Registered nosave memory: [mem 0xbcd4c000-0xbcd4cfff]
PM: Registered nosave memory: [mem 0xc9c0e000-0xca782fff]
PM: Registered nosave memory: [mem 0xca783000-0xca7d0fff]
PM: Registered nosave memory: [mem 0xca7d1000-0xcc9defff]
PM: Registered nosave memory: [mem 0xcc9df000-0xcd077fff]
PM: Registered nosave memory: [mem 0xcd079000-0xcd0fefff]
PM: Registered nosave memory: [mem 0xcd318000-0xcdff8fff]
PM: Registered nosave memory: [mem 0xce000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xce000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s86400 r8192 d24192 u131072
pcpu-alloc: s86400 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8232737
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic.efi.signed root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32616192K/33453880K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 837688K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:1216 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3060.217 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6120.43 BogoMIPS (lpj=12240868)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 8048616898752 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (97926.94 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xca7d1000-0xcc9defff] (35708928 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:44:07, date: 10/30/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf3d000-0xfbf3dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf3c000-0xfbf3c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf39000-0xfbf39fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf38000-0xfbf383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf37000-0xfbf373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf36000-0xfbf367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf35000-0xfbf350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:01:00.0: [1002:68be] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:118f] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:01.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:02.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:08:00.0: [8086:1539] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfbd00000-0xfbd1ffff]
pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfbd20000-0xfbd23fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:02.0: PCI bridge to [bus 09]
pci 0000:07:03.0: PCI bridge to [bus 0a]
pci 0000:07:04.0: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:0c:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:0c:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:0c:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:0c:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:0c:00.0: reg 0x24: [mem 0xfbc00000-0xfbc001ff]
pci 0000:00:1c.4: PCI bridge to [bus 0c]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:0d:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:0d:00.0: reg 0x10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:0d:00.0: PME# supported from D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0d]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.UNC0: notify handler is installed
ACPI: \_SB_.PCI0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [mem 0x00000010-0x0000001f pref]
e820: reserve RAM buffer [mem 0xbccfb018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbcd19018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbcd2b018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbcd3d018-0xbfffffff]
e820: reserve RAM buffer [mem 0xc9c0e000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd079000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd318000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0580-0x059f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: [io 0x0880-0x0883] has been reserved
system 00:06: [io 0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.3: BAR 0: [mem 0x00000010-0x0000001f pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:02.0: PCI bridge to [bus 09]
pci 0000:07:03.0: PCI bridge to [bus 0a]
pci 0000:07:04.0: PCI bridge to [bus 0b]
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: PCI bridge to [bus 0c]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: PCI bridge to [bus 0d]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfbffbfff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:0d: resource 1 [mem 0xfbb00000-0xfbbfffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19508K (ffff88003ecee000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb8cfb000-0xbccfb000] (64MB) mapped at [ffff8800b8cfb000-ffff8800bccfafff]
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU12 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU13 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU14 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU15 sig=0x306f2, pf=0x4, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414665851.656:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
pcieport 0000:00:01.1: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 71 for MSI/MSI-X
pcieport 0000:06:00.0: irq 72 for MSI/MSI-X
pcieport 0000:07:01.0: irq 73 for MSI/MSI-X
pcieport 0000:07:02.0: irq 74 for MSI/MSI-X
pcieport 0000:07:03.0: irq 75 for MSI/MSI-X
pcieport 0000:07:04.0: irq 76 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, mapped to 0xffffc90013880000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf38000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xfbf37000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:0d:00.0: irq 84 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
usb usb5: SerialNumber: 0000:0d:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
usb usb6: SerialNumber: 0000:0d:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e3c165d0891e3ceeb6dd5c18c7e1993cd24956b0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:25:731
acpi LNXCPU:60: hash matches
rtc_cmos 00:02: setting system clock to 2014-10-30 10:44:11 UTC (1414665851)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[199]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
dca service started, version 1.12.1
ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x20 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfbf36000 port 0xfbf36380 irq 85
ahci 0000:0c:00.0: irq 86 for MSI/MSI-X
ahci 0000:0c:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbc00000 port 0xfbc00100 irq 86
ata8: SATA max UDMA/133 abar m512@0xfbc00000 port 0xfbc00180 irq 86
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 87 for MSI/MSI-X
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:08:00.0: enabling device (0000 -> 0002)
igb 0000:08:00.0: irq 88 for MSI/MSI-X
igb 0000:08:00.0: irq 89 for MSI/MSI-X
igb 0000:08:00.0: irq 90 for MSI/MSI-X
igb 0000:08:00.0: irq 91 for MSI/MSI-X
igb 0000:08:00.0: irq 92 for MSI/MSI-X
igb 0000:08:00.0: added PHC on eth0
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 78:24:af:8f:ac:55
igb 0000:08:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:08:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 78:24:af:8f:a6:47
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-8: ADATA SP900, 5.6.0, max UDMA/133
ata6.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ADATA SP900 5.6. PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 5:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 16 bits of entropy available
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
init: plymouth-upstart-bridge main process (319) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (327) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (332) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (333) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 4-5: New USB device found, idVendor=174c, idProduct=3074
usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-5: Product: ASM107x
usb 4-5: Manufacturer: ASUS TEK.
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
Adding 33452028k swap on /dev/mapper/lubuntu--vg-swap_1. Priority:-1 extents:1 across:33452028k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[444]: starting version 204
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 4-6: New USB device found, idVendor=174c, idProduct=3074
usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-6: Product: ASM107x
usb 4-6: Manufacturer: ASUS TEK.
hub 4-6:1.0: USB hub found
wmi: Mapper loaded
hub 4-6:1.0: 4 ports detected
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_GPE.GPBX 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPBX 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1414665852.945:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=534 comm="apparmor_parser"
type=1400 audit(1414665852.945:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
type=1400 audit(1414665852.945:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
type=1400 audit(1414665852.945:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
type=1400 audit(1414665852.945:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
type=1400 audit(1414665852.945:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
mei_me 0000:00:16.0: irq 93 for MSI/MSI-X
type=1400 audit(1414665852.949:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=535 comm="apparmor_parser"
type=1400 audit(1414665852.949:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
type=1400 audit(1414665852.949:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
asus_wmi: ASUS WMI generic driver loaded
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
kvm: disabled by bios
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 94 for MSI/MSI-X
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 95 for MSI/MSI-X
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
hda-intel 0000:01:00.1: Enable sync_write for stable communication
fglrx: module verification failed: signature and/or required key missing - tainting kernel
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
[fglrx] Maximum main memory to use for locked dma buffers: 31421 MBytes.
[fglrx] vendor: 1002 device: 68be count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
init: failsafe main process (812) killed by TERM signal
usb 3-9: new high-speed USB device number 2 using xhci_hcd
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 3-9: New USB device found, idVendor=174c, idProduct=2074
usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-9: Product: ASM107x
usb 3-9: Manufacturer: ASUS TEK.
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
e1000e 0000:00:19.0: irq 87 for MSI/MSI-X
usb 3-10: new high-speed USB device number 3 using xhci_hcd
usb 3-10: New USB device found, idVendor=174c, idProduct=2074
usb 3-10: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-10: Product: ASM107x
usb 3-10: Manufacturer: ASUS TEK.
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
e1000e 0000:00:19.0: irq 87 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
usb 3-13: new low-speed USB device number 4 using xhci_hcd
usb 3-13: New USB device found, idVendor=04f2, idProduct=0833
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: USB Keyboard
usb 3-13: Manufacturer: CHICONY
usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-13: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input14
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.00 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-13/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/input/input15
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.00 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-13/input1
usb 3-14: new full-speed USB device number 5 using xhci_hcd
usb 3-14: New USB device found, idVendor=0c45, idProduct=7e0a
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: G-Mouse V5
usb 3-14: Manufacturer: Areson
input: Areson G-Mouse V5 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input16
hid-generic 0003:0C45:7E0A.0003: input,hidraw2: USB HID v1.00 Mouse [Areson G-Mouse V5] on usb-0000:00:14.0-14/input0
input: Areson G-Mouse V5 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/input/input17
hid-generic 0003:0C45:7E0A.0004: input,hidraw3: USB HID v1.00 Keyboard [Areson G-Mouse V5] on usb-0000:00:14.0-14/input1
input: Areson G-Mouse V5 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.2/input/input18
hid-generic 0003:0C45:7E0A.0005: input,hiddev0,hidraw4: USB HID v1.00 Mouse [Areson G-Mouse V5] on usb-0000:00:14.0-14/input2
fglrx_pci 0000:01:00.0: irq 96 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1316
[fglrx] Firegl kernel thread PID: 1317
[fglrx] Firegl kernel thread PID: 1318
[fglrx] IRQ 96 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
init: plymouth-splash main process (1338) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: nonblocking pool is initialized
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69
show_signal_msg: 129 callbacks suppressed
lxsession[1644]: segfault at 0 ip 000000000040a2d0 sp 00007fffb884f200 error 4 in lxsession[400000+35000]
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5051 > 5000), lowering kernel.perf_event_max_sample_rate to 25000